Part A: Civil Engineering

Impact factor: 2.5

Aims & Scope

The journal will meet the needs of the researchers and engineers to address risk, disaster and failure-related challenges due to many sources and types of uncertainty in planning, design, analysis, construction, manufacturing, operation, utilization, and life-cycle management of existing and new engineering systems. Challenges abound due to increasing complexity of engineering systems, new materials and concepts, and emerging hazards (both natural and human caused). The journal will serve as a medium for dissemination of research findings, best practices and concerns, and for the discussion and debate on risk and uncertainty related issues. The journal will report on the full range of risk and uncertainty analysis state-of-the-art and state-of-the-practice relating to civil and mechanical engineering including but not limited to:

• Risk quantification based on hazard identification,
• Scenario development and rate quantification,
• Consequence assessment,
• Valuations, perception, and communication,
• Risk-informed decision making,
• Uncertainty analysis and modeling,
• Other related areas.

More Information

For more information about Part A: Civil Engineering and submitting manuscripts please visit the ASCE Website or download the Flyer .

Editorial Board

Editor:

Michael Beer, Ph.D., Leibniz Universität Hannover, University of Liverpool, Germany/UK

Founding Editor (2014-2021):

Bilal M. Ayyub, Ph.D., P.E., University of Maryland College Park, USA

Associate Editors:

Michele Barbato, Ph.D., University of California, Davis, USA
Sifeng Bi, University of Strathclyde, UK
Mario P. Brito, University of Southampton, UK
Eleni Chatzi, Ph.D., D.Eng., C.Eng, ETH Zurich, Switzerland
Jianbing Chen, Tongji University, China
Jianye Ching, National Taiwan University, Taiwan
Gilberto de Souza, Ph.D., University of São Paulo, Brazil
Nikolaos Dervilis, University of Sheffield, UK
Ketson Dos Santos, Ph.D., University of Minnesota, USA
James Englehardt, Ph.D., University of Miami, USA
Matthias G.R. Faes, Ph.D., TU Dortmund University, Germany
Katrina Groth, Ph.D., University of Maryland, USA
Hongwei Huang, Ph.D., Tongji University, China
Ioannis Kougioumtzoglou, Ph.D., C.Eng., Columbia University, USA
James Lambert, Ph.D., University of Virginia, USA
Dian Qing Li, Ph.D., Wuhan University, China
Xiaopeng Li, University of South Florida, USA
Xiaowei Luo, Ph.D, City University of Hong Kong, Hong Kong
Raphael Moura, ANP Brazil, Brazil
Athanasios Pantelous, Ph.D., Monash University, Australia
Edoardo Patelli, Ph.D., University of Strathclyde, UK
Mohammad Pourgolmohammad, Ph.D., University of Maryland, USA
Alba Sofi, Ph.D., University Mediterranea of Reggio Calabria, Italy
Daniel Straub, Ph.D., Technical University of Munich, Germany
Huizhao Tu, Ph.D., Tongji University, China
Xiaobo Qu, Ph.D., Chalmers University, Sweden
Cao Wang, Ph.D., University of Wollongong, Australia
Zaili Yang, Ph.D., Liverpool John Moores University, UK
Yi Zhang, Ph.D., Tsinghua University, China
Pengfei Wei, Ph.D. Northwestern Polytechnical University, China

Managing Editors:

Eleni Chatzi, Ph.D., ETH Zurich, Switzerland
Alba Sofi, Ph.D., University Mediterranea of Reggio Calabria, Italy

Associate Managing Editors:

Ketson Dos Santos, Ph.D., University of Minnesota, USA
Matthias G.R. Faes, Ph.D., TU Dortmund University, Germany
Zhen Hu, Ph.D., The University of Michigan-Dearborn, USA
Yi Zhang, Ph.D., Tsinghua University, China
Cao Wang, Ph.D., University of Wollongong, Australia

Editorial Board Members:

Sami G. Al-Ghamdi, Hamad Bin Khalifa University, Qatar
Siu-Kui Ivan Au, Ph.D., Nanyang Technological University, Singapore
Suk Joo Bae, Hanyang University, South Korea
Hiba Baroud, Vanderbilt University, USA
Andre Beck, Ph.D., University of Sao Paulo, Brazil
Alice Cicirello, TU Delft, Netherlands
Joel Conte, Ph.D., University of California, San Diego, USA
Gilberto de Souza, Ph.D., University of São Paulo, Brazil
Alberto Di Matteo, University of Palermo, Italy
You Dong, Ph.D., The Hong Kong Polytechnic University, Hong Kong
Stephan Ekwaro-Osire, Ph.D., Texas Tech University, USA
Dan Frangopol, Ph.D., Lehigh University, USA
Paolo Gardoni, Ph.D., University of Illinois, Urbana-Champaign, USA
Jim Hall, Ph.D., University of Oxford, UK
Jennifer Helgeson, Ph.D., National Institute of Standards and Technology, USA
Fatemeh Jalayer, Ph.D., University of Naples “Federico II”, Italy
Chao Jiang, Hunan University, China
Zhan Kang, Ph.D., Dalian University of Technology, China
Ioannis Kougioumtzoglou, Ph.D., C.Eng., Columbia University, USA
Samuel Labi, Ph.D., Purdue University, USA
Xiaopeng Li, Ph.D., University of South Florida, USA
Frank Lombardo, Ph.D., University of Illinois at Urbana-Champaign, USA
Ioannis Mitseas, Ph.D., C.Eng., University of Leeds, UK
Arvid Naess, Ph.D., Norwegian University of Science and Technology, Norway
Nicola Pedroni, Ph.D., University Paris-Saclay, France
Chandrasekhar Putcha, Ph.D., California State University, Fullerton, USA
Shankar Sankararaman, Ph.D., National Aeronautics and Space Administration, USA
Michael Shields, Ph.D., The Johns Hopkins University, USA
Takayuki Shuku, Tokyo City University, Japan
John Sobanjo, Ph.D., Florida State University, USA
Junho Song, Ph.D., Seoul National University, South Korea
John Sorenson, Ph.D., Aalborg University, Denmark
Loon Ching Tang, National University of Singapore, Singapore
Nasim Uddin, Ph.D., P.E., University of Alabama-Birmingham, USA
Nicholas Vavalle, Ph.D., The Johns Hopkins University, USA
Arun Veeramany, Ph.D., Pacific Northwest National Laboratory, USA
Jingfeng Wang, Ph.D., Hefei University of Technology, China
Lei Wang, Ph.D., C.Eng., Changsha University of Science and Technology, China
Naiyu Wang, Ph.D., Zhejiang University, China
Xuesong Wang, Ph.D., Tongji University, China
Yu Wang, Hong Kong University of Science and Technology, China
Pengfei Wei, Northwestern Polytechnical University, China
Wangji Yan, Ph.D., University of Macau, Macau
Mojtaba Yazdani, Ph.D., Sahand University of Technology, Iran
Mahdi Zarghami, Ph.D., University of Tabriz, Iran
Dongming Zhang, Tongji University, China
Hao Zhang, Ph.D., University of Sydney, Australia
Zhenhao Zhang, Ph.D., Changsha University of Science and Technology, China
Enrico Zio, Ph.D., Polytechnic of Milan, Italy
Konstantin Zuev, Ph.D., CalTech, USA Hadi Sarvari, Ph.D., Birmingham City University, UK Min Xie, Ph.D., City University Hong Kong, China Lechang Yang, Ph.D., University of Science and Technology Beijing, China Chong Tang, Ph.D., Dalian University of Technology, China

Editorial Advisory Board:

Alfredo H.-S. Ang, Ph.D., University of California, Irvine, USA
Kenneth R. Balkey, Ph.D., Westinghouse Electric Company, USA
Richard E. Feigel, Ph.D., Hartford Steam Boiler Inspection & Insurance Co., USA
Gerald Galloway, Jr., Ph.D., University of Maryland, College Park, USA
Richard Wright, Ph.D., Retired, National Institute of Standards and Technology, University of Maryland, College Park, USA

Early Career Editorial Board:

Rudraprasad Bhattacharyya, Ph.D. P.E., Cronus Technology Inc., USA
Shweta U. Dabetwar, Ph.D., University of Massachusetts, Lowell, USA
Somayajulu L. N. Dhulipala, Ph.D., Idaho National Laboratory, USA
Vasileios C. Fragkoulis, Ph.D., Leibniz University Hanover, Germany
Chen Jiang, Ph.D., Huazhong University of Science and Technology, China
Masaru Kitahara, Ph.D., University of Tokyo, Japan
Shivang Shekhar, Ph.D., Indian Institute of Technology Mandi, India
Yating Zhang, University of Maryland, USA

Committee on Technical Advancement:

Bilal M. Ayyub, Ph.D., P.E., Chair, University of Maryland, USA
Dennis D. Truax, Ph.D., P.E., Vice Chair, Mississippi State University, USA
Patrick R. McCormick, P.E., S.E., Past Chair, USA
Lenor M. Bromberg, P.E., USA
Heather M. Brooks, P.E., USA
Robert L. Cagle, III, P.E., USA
Michael J. Drerup, P.E., USA
Robert K. Goldberg, Ph.D., USA
Scott D. Murrell, P.E., USA
David J. Odeh, P.E., S.E., USA
Lucio Soibelman, Ph.D., P.E., University of Southern California, USA

Assistant to the Editor-In-Chief

Torsten Ilsemann